Casework Back Specification Options
 |
A. Core: |
| 1. Medium Density Fiberboard | |
| 2. Plywood | |
|
B. Exposed face: |
| 1. Thermal bonded melacoat | |
| 2. High pressure decorative laminate GP50 (.050) or GP28 (.028) | |
|
C/D. Concealed face or Closed interior face: |
| 1. Thermal bonded melacoat | |
| 2. High pressure decorative laminate GP50 (.050) or GP28 (.028) | |
| 3. High pressure backer BK20 (.020) | |
|
E. Open interior face: |
| 1. Thermal bonded melacoat | |
| 2. High pressure decorative laminate GP50 (.050) or GP28 (.028) | |
|
F. Construction: |
| 1. Carcass parts are dadoed to accept back panel and hold it captive on all | |
| four sides. A bead of hot melt glue is applied around the perimeter while | |
| the case is clamped under pressure on factory assembled cases. | |
| This secures the back to the carcass ensuring squarness and preventing | |
| racking of the case |