Casework Sub-base Specification Options

	A. Core:
	1. Plywood Thickness used shall be 3/4”.
	B. Exposed face:
	1. Unfinished plywood ready to accept rubber cove-base moulding.
	2. High pressure decorative laminate GP50 (.050).
	C. Concealed face:
	1. Unfinished plywood ready to accept rubber cove-base moulding.  Base
	moulding material supplied and installed by others.
	D. Construction:
	1. Glued and stapled to form a continous ladder type support structure for the
	cases.  Allowing the installer to more accurately level cabinets during
	installation and greatly reduce the possibility of water wicking up into the
	side panel resulting in failure of the substrate.

  Back