Base Corner

If Front sizes are required the Cabinets Designs with Fronts must be ordered. This does not mean you have to order the Fronts, just use a design that has Fronts. We cannot provide Front sizes for Non-Standard Height Cases.

The Customer must supply detailed sketches of the Custom Boring Patterns required. An additional upcharge is added based on the time required for programming and machining which is determined after review of the pattern. No upcharge is added if cases have our standard boring pattern.

Base Pie-Cut Corner 0 Door

Section & Boring Pattern

Back

Order this design if the Case Height is not a Standard 32m Ht. or Boring Pattern is custom. W/H/D dimensions are variable. Width = Dimension out of Corner (typically 36"), Depth = Side Panel Depth.

BC0D-???	W(")	W(mm)	H(")	H(mm)	D(")	D(mm)	Shelf Qty
	var	var	var	var	var	var	var

Base Pie-Cut Corner 2 Door

Section & Boring Pattern

Back

Specify Hinging L/R. W/H/D dimensions are variable. Width = Dimension out of Corner (typically 36"), Depth = Side Panel Depth. Standard 32mm Heights listed below, custom Heights available.

BC2D-???	W(")	W(mm)	H(")	H(mm)	D(")	D(mm)	Shelf Qty
	var	var	23.93	608	var	var	var
			25.19	640
			26.45	672
			27.71	704
			28.97	736
			30.23	768

Base Diagonal 0 Door

Section & Boring Pattern

Back

Order this design if the Case Height is not a Standard 32m Ht. or Boring Pattern is custom. W/H/D dimensions are variable. Width = Dimension out of Corner (typically 36"), Depth = Side Panel Depth.

BD0D-???	W(")	W(mm)	H(")	H(mm)	D(")	D(mm)	Shelf Qty
	var	var	var	var	var	var	var

Base Diagonal 1 Door

Section & Boring Pattern

Back

Specify Hinging L/R. W/H/D dimensions are variable. Width = Dimension out of Corner (typically 36"), Depth = Side Panel Depth. Standard 32mm Heights listed below, custom Heights available.

BD1D-???	W(")	W(mm)	H(")	H(mm)	D(")	D(mm)	Shelf Qty
	var	var	23.93	608	var	var	var
			25.19	640
			26.45	672
			27.71	704
			28.97	736
			30.23	768