Base Sink

If Front sizes are required the Cabinets Designs with Fronts must be ordered. This does not mean you have to order the Fronts, just use a design that has Fronts. We cannot provide Front sizes for Non-Standard Height Cases.

The Customer must supply detailed sketches of the Custom Boring Patterns required. An additional upcharge is added based on the time required for programming and machining which is determined after review of the pattern. No upcharge is added if cases have our standard boring pattern.

Base Sink 0 Door Section & Boring Pattern Back
Order this design if the Case Height is not a Standard 32m Ht. or Boring Pattern is custom. W/H/D dimensions are variable. Specify the height of the turndown. Typical use is for sink base and cooktop.
BS0D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS0D.gif (2124 bytes)
  var var var var var var var
               
               
               
               

 

Base Sink 1 Door Section & Boring Pattern Back
Specify Door Hinge L or R, Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS1D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS1D.gif (2543 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 1 Door 1 False Section & Boring Pattern Back
Specify Door Hinge L or R, Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS1D1F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS1D1F.gif (2542 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 2 Door Section & Boring Pattern Back
Specify  Shelf Qty per cabinet. W/D Dimensions are variable.. Specify the height of the turndown.
BS2D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS2D.gif (2580 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 2 Door 1 False Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS2D1F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS2D1F.gif (2572 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 2 Door 2 False Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS2D2F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS2D2F.gif (2606 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 0 Door 1 Tilt-out Section & Boring Pattern Back
Order this design if the Case Height is not a Standard 32m Ht. or Boring Pattern is custom. W/H/D dimensions are variable. Specify the dimension to the C/L of the Drawer Rail. Typical use is for sink base requiring tilt-out tray.
BS0D1T-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty  BS0D1T.gif (2115 bytes)
  var var var var var var var
               
               
               
               

 

Base Sink 1 Door 1 Tilt-out Section & Boring Pattern Back
Specify Door Hinge L or R, Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS1D1T-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS1D1T.gif (2506 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 2 Door 1 Tilt-out Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS2D1T-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS2D1T.gif (2572 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 0 Door 2 Tilt-out Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS0D2T-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty  BS0D2T.gif (2161 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 2 Door 2 Tilt-out Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS2D2T-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS2D2T.gif (2614 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 2 Door 1 Drawer 1 False Left Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown.
BS2D1D1FL-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS2D1D1FL.gif (2649 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 2 Door 1 Drawer 1 False Right Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable.   Specify the height of the turndown.
BS2D1D1FR-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS2D1D1FR.gif (2643 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 0 Door 2 Drw 1 False Section & Boring Pattern Back
Order this design if the Case Height is not a Standard 32m Ht. or Boring Pattern is custom. W/H/D dimensions are variable. Specify the dimension to the C/L of the Drawer Rail and the clear dimension required between the Drawer Support Rails (Sink Opening). Can be ordered with or without drawer.  The Sink Base has a drawer on each side of the sink opening.
BS0D2D1F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS0D2D1F.gif (2351 bytes)
  var var var var var var var
               
               
               
               

 

Base Sink 2 Door 2 Drw 1 False Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. Specify the clear dimension required between the Drawer Support Rails (Sink Opening). Can be ordered with or without drawer.  The Sink Base has a drawer on each side of the sink opening.
BS2D2D1F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BS2D2D1F.gif (2737 bytes)
  var var var var var var var
               
               
               
               

 

Base Sink Blind Left 1 Door 1 False Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown. See the   Base Blind Cabinet page for layout tips.
BSBL1D1F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BSBL1D1F.gif (2516 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink Blind Left 2 Door 1 False Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown. See the   Base Blind Cabinet page for layout tips.
BSBL2D1F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BSBL2D1F.gif (2557 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink Blind Right 1 Door 1 False Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown. See the   Base Blind Cabinet page for layout tips. 
BSBR1D1F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BSBR1D1F.gif (2536 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink Blind Right 2 Door 1 False Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/D Dimensions are variable. . Specify the height of the turndown. See the   Base Blind Cabinet page for layout tips.
BSBL1D1F-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BSBR2D1F.gif (2542 bytes)
  var var 23.93 608 var var var
      25.19 640      
      27.71 704      
      28.97 736      
      30.23 768      

 

Base Sink 0 Door Handi-cap Accessible Section & Boring Pattern Back
Order this design if the Case Height is not a Standard 32m Ht. or Boring Pattern is custom. W/H/D dimensions are variable. Typical Width is 914mm (36") and wider, Side panel height is 826mm (32.5") for handi-cap accessibility. Specify the height and depth of toe-notch if required. Specify height of the turndown if being used for handi-cap accessible sink, typically 737mm (29") clear between rail and floor. See ADA Accessibility Guidelines (ADAAG) - Sections 1-4 for additional information and requirements. Go to bottom of page FIGURES IN BUILDING AND FACILITIES GUIDELINES then go to Figure 31.
BSHC0D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BSHC0D.gif (2112 bytes)
  var var var var var var var
               
               
               
               

 

Base Sink 2 Door Handi-cap Accessible Section & Boring Pattern Back
W/H/D dimensions are variable. Typical Width is 914mm (36") and wider, Side panel height is 826mm (32.5") for handi-cap accessibility. Specify the height and depth of toe-notch. Height of the turndown allows  737mm (29") clear between rail and floor. Specify if 165 dgr. hinges required.  See ADA Accessibility Guidelines (ADAAG) - Sections 1-4 for additional information and requirements. Go to bottom of page FIGURES IN BUILDING AND FACILITIES GUIDELINES then go to Figure 31.
BSHC2D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BSHC2D.gif (2610 bytes)
  var var 32.50 826 var var var
               
               
               
               

 

Base Trash 1 Door No Bottom Section & Boring Pattern Back
W/H/D dimensions are variable. Typical use is to house a trash can for a trash drop.
BT1D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty BT1D.gif (2332 bytes)
  var var var var var var var
               
               
               
               

 

backbtn.gif (2315 bytes)homebtn.gif (1827 bytes)