Cabinet Hardware Specification Options

	A. Dowels:
	1. Carcass dowels are laterally fluted kiln dried hardwood beech
	8mm x  35mm, Drawer dowels are laterally fluted kiln dried hardwood beech
	8mm x 30mm.
	B. Hinge:
	1. Grass 3803 Snap-On 120° self-closing hinge and base plate with Nickel
	plated finish.  Quantities per manufacturers recommendation.  Hinges are
	warranted by the manufacturer for as long as the original consumer purchaser
	owns the product.
	C. Shelf support:
	1. Plastic foot with 1-5mm steel pin
	D. Slide:
	1. Grass 6620 bottom mount  3/4 extension with baked on epoxy finish.
	100-pound static load capacity (ANSI/BHMA Testing)  Self closing feature with
	(Silent Glide) rollers.  Slides are warranted by the manufacturer for as long as
	the original consumer purchaser owns the product.
	2. Grass 3211H bottom mount  Full extension with baked on epoxy finish.
	100-pound static load capacity (ANSI/BHMA Testing)  Self closing feature with
	(Silent Glide) rollers.  Slides are warranted by the manufacturer for as long as
	the original consumer purchaser owns the product.
	3. Grass 6036 Unigrass Metal Integrated drawer slide with side panel 3/4
	extension with baked on epoxy finish. 100-pound static load capacity
	(ANSI/BHMA Testing)  Self closing feature and (Silent Glide) rollers.  Slides
	are warranted by the manufacturer for as long as the original consumer
	purchaser owns the product.
	4. Grass 6200 Unigrass Full extension member inserts between 6036 slide
	components to allow Full extension as required.  Also allows drawers to be
	retrofitted to Full extension. epoxy finish.  100- pound static load capacity
	(ANSI/BHMA Testing)  Self closing feature with (Silent Glide) rollers. Slides are
	warranted by the manufacturer for as long as the original consumer purchaser
	owns the product.
	E. Pull
	1. 3” Wire pull available in polished chrome, brushed chrome, polished brass.
	2. Non-standard pulls available on request.