Cabinet Top/Bottom/Shelf/Rail Specification Options

	A. Core:
	1. Industrial Grade 45 lb. Particleboard
	2. Medium Density Fiberboard
	3. Plywood
	B. Exposed face:
	1. Thermal fused melamine
	2. High pressure decorative laminate GP50 (.050) or GP28 (.028)
	C/D. Concealed face or Closed interior face:
	1. Thermal fused melamine
	2. High pressure decorative laminate GP50 (.050) or GP28 (.028)
	3. High pressure backer BK20 (.020)
	E. Open interior face:
	1. Thermal fused melamine
	2. High pressure decorative laminate GP50 (.050) or GP28 (.028)
	F. Edgeband:
	1. 1mm PVC banding machine applied with waterproof hot melt adhesive.
	Edgeband is applied to the exposed / semi-exposed edge of a side and
	on the bottom of wall sides unless HPL is specified on the exposed bottom.
	(Note: 1mm PVC is only available to match solid color laminates)
	(Note: 3mm edgebanding is not available on carcass parts.)
	2. High pressure decorative laminate GP50 (.050). Edgeband is applied to
	the exposed / semi-exposed edge of a side and on the bottom of wall sides
	unless HPL is specified on the exposed bottom.
	3. 1mm Wood veneer banding machine applied with waterproof hot melt
	adhesive. Edgeband is applied to the exposed / semi-exposed edge of a side
	and on the bottom of wall sides unless HPL is specified on the exposed
	bottom. Available in most wood species.
	G. Construction Boring:
	1. Holes are drilled 8mm in DIA. to accept 8mm fluted hardwood Beech
	dowels.  Minimum of 4 dowels each on 12” deep wall cabinets and 6 dowels
	each on 24” deep base cabinets