Wall Door

If Front sizes are required the Cabinets Designs with Fronts must be ordered. This does not mean you have to order the Fronts, just use a design that has Fronts. 

The Customer must supply detailed sketches of the Custom Boring Patterns required. An additional upcharge is added based on the time required for programming and machining which is determined after review of the pattern. No upcharge is added if cases have our standard boring pattern.

Wall 0 Door Section & Boring Pattern Back
Use for Open Cabinets, or as a Case for specialized designs. This design can be ordered in Standard, Non-Standard Case Height or with a Custom Boring Pattern. Specify Shelf Qty per cabinet. W/H/D dimensions are variable.
W0D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty W0D.gif (1949 bytes)
  var var var var var var var
               
               
               
               

 

Wall 1 Door Section & Boring Pattern Back
Specify Door Hinge L or R, Shelf Qty per cabinet. W/H/D Dimensions are variable.
W1D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty W1D.gif (2439 bytes)
  var var var var var var var
               
               
               
               

 

Wall 2 Door Section & Boring Pattern Back
Specify Shelf Qty per cabinet. W/H/D Dimensions are variable.
W2D-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty W2D.gif (2501 bytes)
  var var var var var var var
               
               
               
               

 

Wall 2 Door Micro-Wave Section & Boring Pattern Back
This design can have an extended shelf fitted in and over the bottom panel, creating a 38mm (1 1/2") thick bottom shelf for larger microwaves, or the 19mm 3/4" bottom can be made deeper and used as an extended shelf.  There is no linebore below fixed shelf. Specify Shelf Qty per cabinet, dimension from the bottom up to centerline of fixed shelf, extended shelf requirements. W/H/D Dimensions are variable. 
W2DMWV-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty W2DMWV.gif (2112 bytes)
  var var var var var var var
               
               
               
               

 

Wall 2 Door Stacked Section & Boring Pattern Back
This design is for wall cabinets that are tall and require door over door. Specify Door Hinge L or R, Shelf Qty per cabinet, the dimension from the bottom up to the centerline of the fixed shelf. W/H/D dimensions are variable.
W2DS-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty W2DS.gif (2518 bytes)
  var var var var var var var
               
               
               
               

 

Wall 4 Door Stacked Section & Boring Pattern Back
This design is for wall cabinets that are tall and require door over door. Specify Shelf Qty per cabinet, the dimension from the bottom up to the centerline of the fixed shelf. W/H/D dimensions are variable.
W4DS-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty W4DS.gif (2627 bytes)
  var var var var var var var
               
               
               
               

 

Wall 2 Door Vertical Partition Section & Boring Pattern Back
This design is used for wide cabinets typically in excess of 36". The vertical partition is centered. Specify Total Shelf Qty per cabinet. W/H/D dimensions are variable.
W2DVP-??? W(") W(mm) H(") H(mm) D(") D(mm) Shelf Qty W2DVP.gif (2513 bytes)
  var var var var var var var
               
               
               
               

 

backbtn.gif (2315 bytes)homebtn.gif (1827 bytes)