Wall Cabinet Design Name & Description

Wall cabinets are unique in the 32mm System, often some or all of the Wall cabinets on a project have to be a non-32mm System height. In theory you always use 32mm System heights for cabinet heights, but in reality its not always possible. So we manufacture Wall cabinets to any height you need. One benefit of using the 32mm System heights is the hinge boring is symmetrical, non-32mm height cabinets don't have symmetrical hinge boring.

For example the version of the 32mm System we use has Side Panel heights in 32mm increments like 605/608, 637/640, 669/672, and so on. The dimension from the bottom of the side panel up to the centerline of the 1st hole is 46.5mm on Wall or Base cabinets. Side panel heights that are 3mm less than a number evenly divisible by 32mm, i.e. (605mm), have doors that are flush at the bottom and top. Side panel heights that are evenly divisible by 32mm, i.e. (608mm), have doors that are flush at the bottom and  have a 3mm reveal at the top, to allow clearance for a soffit or Crown moulding.

	W0D	Wall 0 Door
	W0D0BCK	Wall 0 Door 0 Back
	W0DFS	Wall 0 Door Fixed Shelf
	W0DMWV	Wall 0 Door Micro-Wave
	W0DPNS	Wall 0 Door Peninsula
	W0DVP	Wall 0 Door Vertical Partition
	W0D0B	Wall 0 Door 0 Bottom
	WES0D	Wall End Shelf 0 Door

	WBLOD	Wall Blind Left 0 Door
	WBL1D	Wall Blind Left 1 Door
	WBL2D	Wall Blind Left 2 Door
	WBROD	Wall Blind Right 0 Door
	WBR1D	Wall Blind Right 1 Door
	WBR2D	Wall Blind Right 2 Door

	WC0D	Wall Pie-Cut Corner 0 Door
	WC2D	Wall Pie-Cut Corner 2 Door
	WD0D	Wall Diagonal 0 Door
	WD1D	Wall Diagonal 1 Door
	WD2D	Wall Diagonal 2 Door

	W0D	Wall 0 Door
	W1D	Wall 1 Door
	W2D	Wall 2 Door
	W2DMW	Wall 2 Door Micro-Wave
	W2DS	Wall 2 Door Stacked
	W4DS	Wall 4 Door Stacked
	W2DVP	Wall 2 Door Vertical Partition